The key to success for many beautiful acrylic pouring cells is the consistency of your acrylic colors mixed with pouring medium. Only if this consistency fits, you will prevent the different colors from mixing too firmly and the cells from running (too liquid) and cells from forming at all (too thick).
How to get lots of big cells! You will get lots of big cells by adding both floetrol and silicone oil to your acrylic paint mix. When you pour this mixture onto a surface the cells will very quickly reveal themselves.
Cells in acrylic pouring tend to form when there is a difference in density between the paint colors. There are different methods of achieving cells in an acrylic pour, but the number of cells that appear and the size of the cells are largely determined by the difference in the densities of the colors.
When creating fluid acrylic paintings it is possible to get some nice cells using various additives to the paint. One of these additives that can give good cells (and this is the one that I use most often) is Floetrol which is a proprietary product that is designed to help with paint flow for water based paints.
Why do you use a torch on acrylic pours? The use of a heat source on the surface of an acrylic pour helps break the surface tension of the top layer of paint. This allows lighter weight colors rise through the heavier colors and it helps close air pockets and bubbles that may form.
A cloud pour is a pour where you get fluffy cells (usually of white) that look like clouds! This is achieved by adding in a satin enamel (Decoart Americana Satin Enamel is a popular choice) OR I experimented and found that you this technique also works with interior house paint as well, which many of us have on hand!
How much floetrol to add to acrylic paint? An excellent way is to follow official instructions and mix 1 part of acrylic paint to 2 parts of Floetrol. The best ratio for your needs depends on the paint you use, the paint consistency you want, and your experience. There are also some recipes with silicone and water.
Low Quality Oils
Coconut oil, baby oil, cooking oil and olive oil are examples of greasy oils that end up making your acrylic pour a cholesterol ridden mess (pun intended).
Elmer's Glue is probably going to be your cheapest Floetrol substitute option, other than water. If you dilute your glue with a little bit of water, you will get a similar pouring consistency as Floetrol. Your painting will dry to a matte finish when using Elmer's Glue-all (very similarly to Floetrol).
Ghost pearls or interference pearls are transparent, coloured flakes that interfere and react with the base coat they have been mix with, or applied over. These are flakes that moves and highlight the colour of the base as it moves in the sun.
See all 21 photos The metalflake chunks are mixed into a clear and sprayed over a base color. In this case, we used red flakes in House of Kolor SG150 Intercoat Pearl & Flake Karrier. The rule of thumb is two teaspoons of 'flake per quart of clear.
The main benefit of auto paint with a pearlescent finish is that it makes your vehicle look super cool. The mica that refracts particles adds an extra oomph and brings rich color variance to what otherwise might have been a standard monotone finish.
PVA Glue (also known as Elmer's Glue All in the US) can be used to make a very inexpensive DIY pouring medium. PVA Glue does all the basics fairly well, and has all the binding ability you'd expect from an adhesive.
Acrylic and enamel are not supposed to be mixed, as they are entirely different in their makeup since enamel is a solvent-based paint, and acrylic is water-based.
ByBrittney. Natural stone minerals are used to make mica powder, which has a metallic sheen. Powders are a great way to add a light-catching element to any craft. You can mix it with oil or acrylic paint, or even with other materials, such as clay and plaster, to make a variety of paints.
Can I Use a Hair Dryer Instead of a Heat Gun for Acrylic Pouring? In the case of acrylic pouring, a hair dryer will be the best tool.
If you are pouring acrylic, a hair dryer will be the most effective tool. Because the heat of the heat gun is too powerful for acrylic paints, and you will end up cooking your paint if you get it too close to your paint or leave it on one spot for too long, which will ruin your painting.
Chameleon paint is a kind of a special paint with other substances to produce color changes. General categories: temperature change and ultraviolet light discoloration of paint paint, different angles, natural light color changing paint (Chameleon).