The important difference between 600 and i-Type film is the absence of a battery inside the film cartridge. This means that i-Type film will not work with vintage Polaroid cameras. New Polaroid cameras have a built-in rechargeable battery, so they don't need a battery to power the camera.
Regular 600 film has a battery in the film packet that powers the camera. I-Type film doesn't have a battery in the film pack as new Polaroid OneStep cameras have an internal battery that powers the camera.
You can also use the Polaroid Originals 600, Impossible Project 600 and the original Polaroid 600 films in these cameras. However, the I-Type films cannot be used in the SX-70 and 600 retro cameras from Polaroid due to the lack of battery.
Always shoot in bright light or use the camera flash for best results. Photos develop within 15 minutes. Shield photos from the light and place them face down as they develop.
The image "never touches air, so shaking or waving has no effect," the company said on its site. "In fact, shaking or waving can actually damage the image. Rapid movement during development can cause portions of the film to separate prematurely, or can cause 'blobs' in the picture."
It works with any Instax Mini film and you can even choose fun borders or black and white options.
While no company continues to manufacture it, as of today (1/30/2018), you can still buy film online. The last company to manufacture film for Polaroid Land Cameras was Fujifilm who discontinued 4.25" x 3.25" instant film ("pack film") in 2017.
NEW FILM FORMAT: The Polaroid Go only uses Polaroid Go format films. The same Polaroid you know and love, only smaller.
The Polaroid Spectra System uses a type of Polaroid film that's slightly wider than the classic 600/SX-70 square frame. This film is interchangeably called Spectra, Type 1200, and Image.
Polaroid SX-70, 600 and i-Type film measures exactly 3.108 × 3.024 inches (photo area) and 4.233 x 3.483 inches (total area). That's 7.894 x 7.6801 cm (photo area) and 10.752 x 8.847 cm (total area).
The Polaroid 600 OneStep series uses Polaroid's 600 Platinum film. This type of film cartridge contains its own battery. If your Polaroid 600 OneStep will not power on, the chances are good that the film cartridge's battery is dead. Unfortunately, this renders the film cartridge useless; it requires replacement.
Current Polaroid film is different from the Polaroid film of the past. Much of the chemistry and components used by Polaroid are no longer available, so we had to reinvent the film using entirely new materials and a new formula. Needless to say, it wasn't easy.
Classic camera values range from worthless up to $8,000 or more, depending on factors like brand, condition, film format, and popularity. Many are worth around $15, though it's impossible to place an average value on classic cameras. You can see a list of the best ones available in 2020 here.
In 2008, Polaroid discontinued its line that produced the film for the Spectra camera models the company created. However, it is still possible to get this film through eBay.
Polaroid film is very sensitive to bright light during the first few minutes of development. It's important to shield your photo from bright light immediately after it ejects from the camera and keep it in a dark place while it develops.
Polaroid themselves notes, “Peel-apart versions of the film needed to dry before it could be handled, so waving the photo helped it to dry more quickly”.
In most cases, photos turn out underexposed because there's insufficient light. Instant cameras thrive in bright and sunny environments. If you're shooting indoors, it's best to use flash. Some models of Polaroid cameras, like SX-70 cameras, don't include a built-in flash, so you need to purchase it separately.
Make sure your favorite Polaroid camera is always ready to shoot with Polaroid Originals Color 600 Film. For use with Polaroid 600 or i-Type cameras, this pack of Polaroid 600 film includes eight instant color photos that will quickly develop within 10 to 15 minutes.