What finish does fender use?

Fender continues to use urethane finishes on many of its instruments (American Standard Series, various artist models), with variants including flatter satin urethane (necks on Deluxe, Standard, Highway One, American Deluxe and American Standard models) and thicker, shinier gloss urethane (American Specials, Ritchie ...

What guitars have a nitrocellulose finish?

Which Guitars Have Nitro Finishes? These days, this type of guitar finish is used almost exclusively by Gibson and Fender's Custom Shop divisions. As these departments mostly produce premium time-honoured instruments, they therefore use nitro finishes to recapture the essence of their older vintage models.

Does Fender still use ash?

Fender used ash for electric guitar and bass bodies more or less exclusively from 1950 to mid-1956, and to the present continues to use ash on a relatively small number of instruments. Guitars and basses with blonde finishes typically have ash bodies because the wood “takes” that particular finish especially well.

What finish is on a Fender neck?

What Material is best for guitar Neck finish? Nitrocellulose is thinner than Polyurethane and Polyester so it resonates better but offers less protection from dent and scratch. Poly Finishes offer a Harder finish with more Gloss but can constrict the wood from expansion and contraction compressing the tone.

What finish is used on guitars?

Typically, when it comes to guitars, the type of lacquer used is either nitrocellulose or acrylic. For a great number of years lacquer was the go-to finish for many products including guitars.

How to Spot a FAKE Fender in Seconds!

When did Fender stop using nitrocellulose?

Nitrocellulose lacquer (“nitro”) was the finish most often used during Fender's original 1950s and '60s golden age, although acrylic lacquers were also used.

Does Gibson use nitrocellulose lacquer?

Gibson instruments are finished with several coats of a high-quality nitro-cellulose lacquer. This finish is hand-buffed to a high-gloss, mirror-like surface. Unlike other less expensive finishes, nitro-cellulose does not detract from the tone of the instrument and ages beautifully.

Why are maple fretboards lacquer?

You can lacquer any wood and it'll protect the surface just fine, but there are some woods like rosewoods that don't need it because their natural oils and hardness naturally resist wear and decay. Maple on the other hand does need a finish to resist decay because it's much less oily than rosewoods.

How do you know when a nitrocellulose finish?

Find a hidden area like the control cavity and rub a small spot with a Q-Tip dipped in acetone. If the finish dissolves then it is nitrocellulose, if it doesn't it's likely a urethane, polyurethane, or polyester finish..

What are electric guitars painted with?

Acrylic paint is often used to paint guitars, especially for decorative purposes, such as designs or images. Guitar paints are usually made from polyester, polyurethane, and nitrocellulose, which continue to cure over time, making them durable and enhancing the sound of the instrument.

Which is better alder or ash?

Sonically, Alder will produce more attack and presence with its emphasised upper-mids, resulting in it sounding a little bit punchier than Ash. Ash will give you a comparably rounder and slightly mellower tone with chiming highs that aren't too bright. Discover Fender guitars at World of Music.

What wood does Gibson use?

Gibson's signature tonewood of choice is Mahogany. It uses this almost exclusively for its solid-body electric guitar model's bodies and necks. Mahogany yields the focused lows and rich mids that Gibson guitars are so renowned for, with its density contributing to the long sustain that they can also achieve.

Why did my Fender stop using ash?

In an interview with Guitar World, Fender's Executive Vice President of Product, Justin Norvell, revealed that the difficult decision was made largely because of the Emerald Ash Borer beetle, a non-native invasive pest that has been destroying the unique "swamp ash" found in the American South - favored by Fender for ...

What finish does Martin use on their guitars?

martin uses a product called chem sheen , it is a satin finished lacquer. A gloss finish still requires buffing and polishing to get the gloss as shiney as they do . for a year or two, santa cruz french-polished (with shellac) the tops of a few guitars.

Does Martin use Nitro?

yes Martin uses Nitro on the standard series , The X series uses a poly wipe on finish . The satin finishes are also nitro with an additive to kill the gloss.

Is nitrocellulose the same as lacquer?

Nitrocellulose was adopted quickly by the car industry and remained the finish of choice through to the late-1950s. Furniture and musical instrument manufacturers also switched to nitrocellulose lacquer, and mostly it was referred to simply as 'lacquer'.

Does nitrocellulose lacquer yellow?

Nitrocellulose lacquers are notorious for yellowing, if at all possible you may want to consider using a cellulose acetate butyrate (CAB) acrylic blend. These types of lacquers have been used in the automotive paint industry for many, many years with minimal color change.

Is nitro lacquer toxic?

► Inhaling Nitrocellulose can irritate the nose and throat. ► Exposure can cause headache, nausea, vomiting, dizziness, difficulty breathing and loss of consciousness.

Should you lacquer a fretboard?

Traditionally, maple fret boards are lacquered while rosewood and ebony are left without lacquer. So if you like the feel of a maple fretboard, you can emulate that by applying lacquer to a rosewood board.

What is nitrocellulose lacquer?

Nitrocellulose lacquer is made by taking cotton and treating it with sulfuric and nitric acid, generating an acidic pulp, which can be strained to produce a watery resin. The resulting resin is then combined with a number of fast drying solvents to produce the finished lacquer.

Does rosewood need a finish?

Shellac is the best sealer for oily woods like rosewood, but you can't topcoat it with polyurethane, as it won't adhere. If you want to finish the rosewood, either spray it with lacquer or apply a coat of resin-based varnish.

Did Gibson ever use poly finish?

Yet despite the advantages of Poly, Gibson continue to only use Nitro as the finish on all their USA made electric guitars including the iconic Les Pauls, SGs and 335 / 339s. Given strict EPA controls in the USA, steadfastly sticking to Nitro must pose some significant challenges for the Gibson factories.

What finish did Gibson use in the 70s?

By in late 1975, the neck construction was changed from mahogany to maple, until the early 1980s, when the construction returned to mahogany. The body changed back to solid mahogany from the pancake design in late 1976 or early 1977. In 1985 the Gibson canceled the Deluxe model.

What is Gibson VOS process?

What is the Gibson VOS finish? Gibson's VOS finish uses several hand-sprayed layers of genuine nitrocellulose lacquer, followed by a proprietary hand buffing to give their Vintage Original Spec guitars a glowing, gently-aged patina that can be seen as well as felt.

Previous article
Which quartz has the most sparkle?
Next article
Is Sony a6000 good for videography?