# How far can you run a toilet waste pipe?

The toilet can be as far as 10 feet from the stack if the waste line is 4 inches in diameter. The stack can handle the new toilet if the critical distances are maintained.

## How far can a toilet drain pipe be?

According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.

## How far can a toilet drain be from main stack?

2. Tie the waste line from the new toilet directly into the stack if the toilet is within six feet of the stack and the waste line is 3 inches in diameter. If the waste line is 4 inches in diameter, the toilet can be as far as 10 feet from the stack.

## How long can a toilet pipe run?

Six metres is the maximum run according to Building Regualtions, but as you have realised yourself, a good fall on the branch pipe is essential. 2.5º, or 44mm fall for every metre run, is the usual standard. IIRC it is permissible (but inadvisable) to go as low as 18mm per metre, the maximum is 90mm per metre.

## How far can you run a 2 waste pipe?

When builders look only at the table without reading the text, they find that a 2-inch-diameter drain can run a maximum distance of 8 feet to the vent.

## How much run does a waste pipe need?

The minimum fall for a waste pipe is 1 in 40. The maximum fall is 1 in 110 (apart from vertical pipes but that's a different story). So pipes with a gradient between 1 in 40 and 1 in 110 should have adequate flow to prevent blockages from occurring.

## How far can a trap be from a drain?

According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.

## How far can you run a toilet waste pipe horizontally?

The toilet can be as far as 10 feet from the stack if the waste line is 4 inches in diameter. The stack can handle the new toilet if the critical distances are maintained.

## How far can a toilet drain run horizontally?

That means your fixture drain can have an unlimited distance (909.1). Keep in mind your toilet still needs a vent, but your trap arm can be as long as necessary. Now on the other hand, if your plumbing code is the UPC, they're not as generous… In the UPC, the toilet's trap to vent distance is limited to 6 feet.

## Can you run toilet drain horizontal?

All drain lines should have a minimum fall of an eighth of an inch per foot of horizontal run. Some codes allow a quarter-inch of fall per foot. If you slope the pipe much more than a quarter-inch per foot, you can set yourself up for future clogs, as the liquids may outrun the solids in steep-pitched pipes.

## How far can you offset a toilet?

The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank.

## Can two toilets share the same waste pipe?

Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.

## Can you move toilet waste pipe?

There is usually a vertical waste water pipe under the toilet that uses gravity to move wastewater away. For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.

## Can toilet waste pipe run under floor?

They can be mounted on the floor, but usually pipes run below the floor in-between the floor joists. The pipe diameter is 110mm. Running this pipe from one end of the house to the other simply is not practical.

## What happens if a toilet is not vented?

Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.

## Can you vent a toilet with a 2 inch pipe?

Toilet vent pipes are usually configured by feeding a 2-inch PVC pipe within the wall in back of the toilet down from the ceiling. This pipe connects right into the toilet drain pipe. Then, the tub/shower drain pipe and sink drain pipe are vented with 1.5-inch pipe, and these branch off the toilet pipe.

## Can a shower and toilet share a vent?

Wet vents are typically used when plumbing a bathroom group. So yes the shower can also be vented by the wet vent along with the toilet. There is one major stipulation when wet venting multiple fixtures when a toilet is one of them: the toilet must be the last fixture connected to the wet vent.

## How many toilets can be on a 3 inch drain?

As a horizontal branch 3" is good for 20 DFU's or 4 bathroom groups.

## How far should toilet waste pipe be from wall?

How far should the toilet waste pipe be from the wall? This is called your 'toilet rough-in' distance, meaning the distance from the wall to the centre of the waste pipe. Most toilets have a rough-in of 12 inches, although older homes can have 10 or 14 inches.

## How long can a horizontal drain pipe be?

If you have 1- 1/4-inch pipe, the horizontal distance of the vent ought to not be more than 30 inches. For a 1- 1/2-inc pipe the vent must be 42 inches away at the most while a 2-inch pipeline must have an optimum distance of 5 feet.

## How long can a drain run be?

Building codes, plumbing codes and not being able to cut through floor joist in the top and bottom 2” of joist, the pipe generally leaves only 4” to run horizontally and drop at a rate of ¼” per foot of horizontal travel. Therefore, drain line can only run 16 feet before dropping into the ceiling.

## How many toilets can you put on a 4 inch line?

3 tank-type toilets, one urinal, 4 sinks. a drinking fountain. 2 Floor drains.

## Does trap have to be directly below drain?

It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.

## Does every drain need a vent?

Without getting too far into building science, a general plumbing rule of thumb is that every drain needs a trap, and every trap needs a vent. All those traps and drains are designed to prevent sewer gas from entering your home.

## What is the minimum trap arm length?

The minimum trap arm length is two pipe diameters, as measured from the trap weir to the vent (not between the hubs of the fittings). So a 2” pipe would require a 4” trap arm minimum.

Next article
How do Swedes say Merry Christmas?