The best way to preserve instant film, is by keeping them away from light, heat, and moisture. To make them last longer, you will want to store them away from sunlight. However, you can display them in in dim areas of your house, out of direct sunlight, or using UV picture frames to protect them.
All Polaroid film should be used within 12 months of production date for best results (you can find the production date stamped on the bottom of each film package).
Store Processed Polaroids Upright
“Finished photos should also be protected, ideally in an album or box stored in a dark, dry place that isn't exposed to extreme heat or harmful gases,” said Broster. And don't just throw the rare photos in a box if you want to cherish them for years to come.
As a result, we always recommend keeping unused film sealed inside of its unopened box, in a cool and dry environment until you are ready to shoot with it. We recommend storing it flat (i.e. on the side with the largest surface area) inside a fridge at a constant temperature between 4 – 18°C (41 – 65°F).
How to Keep Your instax Film Fresh and Protected
- Remove your film carefully. It's easy to expose unused film. ...
- Store the film in a dry and well ventilated place. The optimal temperature is 5-40 degrees Celsius. ...
- Keep your film fresh for long-term storage. ...
- Take care of loaded film, too. ...
- Preserve your photos.
Ultimately, making sure that photos are kept safely in an ideal environment is one of the best ways to prolong their life. Polaroid photos can last decades when they're stored in a dry, cool, and dark environment like an acid-free photo box or album.
After the first few moments have passed, your photo can be removed from under the film shield. The photo is still sensitive to light, however, and should still be kept shielded from strong light sources until it has developed further. For example, you could keep your photo: Face down on a table.
Don't Shake Your Polaroid Pictures
The structure of a Polaroid is a series of chemicals and dyes sandwiched between layers; if you shake your print, there is the off chance you might create unwanted bubbles or marks between some of the layers, causing flaws in the final image.
A: Yes. The Sharper Image instant camera uses the same mini film. A: No, it is not recommended to heat laminate an Instax picture after exposure.
The life of Polaroid film is much longer now thanks to technological advances. But we still recommend keeping developed film cool and dry just to be safe. The conclusion is: Store your camera and films in a dry cool environment, but don't put it in a dehumidifier.
Dark, Dry, and Cool Storage
Store them in a safe place that's dark, dry, and cool. Avoid exposure to UV light or extreme heat—those two elements alone will rapidly destroy any film or photo. Keep your photos safe in the darker areas of your house or in containers that protect them from the sun.
Polaroid film is very sensitive to bright light during the first few minutes of development. It's important to shield your photo from bright light immediately after it ejects from the camera and keep it in a dark place while it develops.
Electronic flashes are designed to have color temperatures of around 5600K. In other words, during the few milliseconds when the flash fires and the shutter is open, the ambient color temperature becomes 5600K, and the picture becomes less yellow.
Do all instant camera prints fade? This is something which we can clear up straight away: Polaroid Originals prints and instax prints will not fade any faster than any other kind of photograph if they are stored properly. However, storing these prints properly requires slightly more care than regular photographs.
Fading is permanent. Once something has shifted, it's changed forever. ULABY: It's ultraviolet light that breaks down the emulsion in instant film, the same kind of light, Freeman says, that damages our skin. So she says, keep those Polaroids someplace cool, dry and dark.
Expired materials can also produce interesting results, but we cannot guarantee that they will process at all. The most common effects of aging are a loss in image contrast, color shifts, or an uneven spread of the chemistry over the image area.
Assuming they won't melt / get damaged in the laminator that it! Polaroid integral prints are already "laminated" -- they need no additional protection. (Polaroid used to make postcard mailers.) Now, the white part on the back might peel loose -- but if the picture is glued to a card, that isn't likely to happen.
Although Instax film is already laminated, one way to protect your Instax images is to laminate them again. Laminating instant film won't harm your images but keep in mind this won't protect your Instax film from sunlight but they will be protected from spills and other dirt and grime.
In most cases, photos turn out underexposed because there's insufficient light. Instant cameras thrive in bright and sunny environments. If you're shooting indoors, it's best to use flash. Some models of Polaroid cameras, like SX-70 cameras, don't include a built-in flash, so you need to purchase it separately.
There's nothing as disappointing for an Instax user as waiting for a photo to develop, only to discover that it has turned out completely white. When this happens, it almost always means that the image has been overexposed. Overexposure is caused when the film is exposed to too much light.
Peel a piece of double-sided tape that is about 1 in (2.5 cm) long off of its roll. Stick it on the back of a Polaroid picture in 1 of the corners. Repeat this for each corner of the photo. If you don't have double-sided tape, you can just use regular clear adhesive tape instead.
Avoid messing around with glue. “You will need a couple of rolls of double-sided tape, which makes putting the Polaroids in your guest book easy."