Spread a baking soda paste over your shower doors, then activate with vinegar. Start with a half cup of baking soda in a wide-mouth container, such as a jar. Add just enough water to form a thick paste. Rub the paste on shower doors with either your hand or a non-abrasive sponge, then rinse with vinegar.
The best way to remove hard water stains from your shower doors is to do so using regular household items such as white vinegar and baking soda.
1. Cleaning with Vinegar and Baking Soda. The mixture of vinegar and baking soda is a useful and potent solution for cleaning glass shower doors. It must be applied gently to avoid scratches that may turn out to be permanent on your glass shower doors.
Combining vinegar and baking soda is perfectly safe but it will cause a chemical reaction, hence the bubbles. Rub onto shower doors and work into glass using a sponge or brush. Allow solution to sit for 15 minutes. Rinse solution with warm water and finish with a microfiber cloth or squeegee.
To get started, try using a half-cup of baking soda, then add water as needed to make a thick paste. Using a nonabrasive sponge, scrub the glass and rinse it with vinegar. Once you've achieved a clean, sparkly surface, there are a few things you can do to make it last longer.
Fill a spray bottle with white vinegar, and use it to thoroughly saturate the glass. Let the vinegar soak in for at least 10 minutes. Let it soak even longer if there's significant buildup. Dip a scrub sponge into baking soda, and scrub the glass.
In a spray bottle, combine 1/3 cup ammonia, 1/4 cup white vinegar, 1/2 cup baking soda, and 7 cups of water. Spray down the shower, then watch as the vinegar and baking soda together create a cleansing, bubbling foam. Let it sit for a few minutes, then wipe down the tiles and tub with a damp cloth.
Another way to use lemon juice for cleaning your shower is to dip the cut side of a lemon half in baking soda. Rub the lemon on the glass. Rinse and dry the surface with distilled water. To reduce soapy build-up, coat the interior of the glass with a layer of lemon oil.
Boil a cup of white vinegar and transfer it to a bowl or spray bottle before allowing it to cool. This mixture will act as your shower glass limescale remover. Use durable rubber gloves to carry the solution to your shower. Dip some paper towels into the hot vinegar and adhere them to the glass door.
No matter how clean you keep your shower, hard water stains are going to accumulate. And they can be very difficult to remove from your shower doors. But if you have a can of WD-40 Multi-Use product on hand, you can remove hard water stains from shower doors quickly and easily.
Simply wipe your Magic Eraser firmly across the glass shower doors with a firm, steady swipe. All it takes is a few wipes to break through soap scum and hard water. Your doors will go from grimy to shiny in no time at all.
Vinegar. Vinegar is a safe, all-natural household cleaner with the amazing ability to combat hard water stains. Pour some in a spray bottle and squirt any surface where you find hard water stains. Let it sit for five to 15 minutes to give the vinegar time to break down the minerals in the chalky, white stain.
Lemon juice contains citric acid which when mixed with the base, baking soda (sodium bicarbonate), reacts to form carbon dioxide and sodium citrate which causes the liquid to fizz and bubble.
2 – Baking Soda
Baking soda is another abrasive cleaning agent that can damage the surface of tubs, especially when it is left to sit on tubs to “soak” or “set” like some online cleaning guides recommend.
Heavy-duty floor cleaner — Mix ¼ cup distilled white vinegar, 1 tablespoon liquid dish soap and ¼ cup baking soda in 2 gallons of warm water.
Here are some recipes to try. Freshen your sink by mixing one part of baking soda with two parts of vinegar. This mixture unlocks an effervescent fizz of carbon dioxide that cleans and freshen drains.
In a microwavable safe glass container, mix ⅓ cup Dawn dish soap with 3 cups white vinegar. Microwave for five minutes until simmering. Spread the mixture in sink basins, bathtubs and showers.
Make your own cleaner on the cheap (and without harsh chemicals) by mixing 1 cup water, 1/2 cup vinegar, a little dish soap, and 10-20 drops of your favorite essential oil for scent, if desired. Keep it in the shower and spray the glass door down after squeegeeing.
Dip paper towels into the hot vinegar and stick them to the glass. The slightly acidic nature of vinegar allows it to soak into and loosen the mineral deposits. Let the vinegar sit for 30 to 60 minutes.
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl.
For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.
Sprinkle 1/4 cup of Borax into the toilet bowl, and swish it around with a toilet brush. Add 1 cup of vinegar. Swish around again. And let the mixture sit in the bowl for about 20 minutes.